NEW bigger packs
You told us you need them in bigger packs of DustBubbles so here they are; packs of 100 and tubes of 500.

US Education Authority adopts DustBubbles
Lead by the Asbestos Technical Unit, a leading US educational institution has adopted the standard and industrial Dustbubbles for all it's building maintenance programs. Please contact us for the full story....

McMaster Carr - US retail.
We're delighted to be include in this major contractors retail products listings. See us under 'Drilling Debris Containment Bubbles'.

New York State Approves Industrial DustBubbles
No more detail at present, watch this space.

Medical Device Technology Magazine
This highly influential industry publication featured DustBubble in an article written by Dr Martini, Director Strategic Technologies at GlaxoSmithKline Pharmaceuticals.

Aerospace and Engineering
Industrial DustBubbles were developed to be as effective as possible; tough and heat resistent, they are suitable for containing and collecting metal shards or swarf during engineering drilling.

Asbestos in UK Schools
A very interesting article was published in the Times Educational Supplement regarding the management of asbestos in UK school buildings. The article is available to view as a larger pdf HERE. Contact us if you'd prefer it emailed to you or go to www.timeseducationalsupplement.co.uk

What is a DustBubble?

DustBubbles are disposable dust collectors for DIY or industrial drills. They use a combination of adhesion to the wall and the action of the drill itself to catch virtually all the dust when you drill. They make drilling jobs easier - leaving both hands free while you drill and quicker by saving you the trouble of clearing up afterwards. When you've finished drilling, you simply remove the DustBubble from the wall and discard it along with all the dust.

In the quick standard procedure there are just four simple steps to follow:

Industrial specification DustBubbles look like the cost effective trade and DIY Dustbubbles, but the new engineering grade material is tough and heat resistent enough to capture hot metal swarf.

The Contamination Control DustBubble kit is a recognised health and safety tool and was developed specifically to provide cost effective contamination free drilling during building maintenance work.The kit contains 50 strong and heat resistant industrial DustBubbles, gel wetting agent, secondary bags, pads for rough wall applications, an approved asbestos waste bag and a full procedure. The industrial DustBubbles are available separately in packs of 10, 100 and 500.

Asbestos, lead-based paint, silica, mold, MDF and metal swarf*
Industrial DustBubbles combined with a wetting agent applied inside the enclosure ;captures all (when used correctly) the debris, there is no further equipment or decontamination neccessary*.

Transparent, flexible & hands free
All DustBubbles are transparent so you can always see where you are drilling. The flexible material allows drilling at an angle or in restrictive spaces and DustBubbles stick to the wall surface so they are hands free for safer drilling.

Tough and heat resistent
DIY DustBubbles are available for ‘Wallpaper & Painted Walls’, ‘Kitchen & Bathroom Tiles’ and ‘Wood (including MDF), Plaster (or Drywall) & Untreated Surfaces’. For non-contamination issue maintenance work these offer a hugely cost effective protection against dust for general health and safety protection and reduce or eliminate clean up time.

*Drilling with the Contamination Control DustBubble Kit is only recommended as part of an approved health and safety procedure and by an insured operator.

Email; info@dustbubble.com or call 07855 743977
Patent pending based on international application no. PCT/GB01/00197.
Copyright © 2008 DustBubble Ltd. All rights reserved.